隨著市場需求的增加，食品機械優勢市場上的大型切肉機也在泛濫，有些肉食機不太合理，也流入市場，這就導致了工作過程中的一些問題，因?yàn)樵O(shè)備的并不便宜，所以，今天小編以下文章教大如何識別數控
大型切肉機?
With the increase of market demand, the advantage of food machinery, the market of large meat cutting machine is also in flood, some meat machine is not reasonable, also into the market, which leads to some problems in the process of work, because the price of the equipment is not cheap, so, today's small make up the following article to teach how to identify CNC large meat cutting machine?
一個很好的數控大型切肉機在每一個細節的設計上也是非常完善和人性化的?？稍诓粨p壞機器的情況下進行日常操作，效率高，穩定性好。近年來市場上出現了一些數控大型切肉機。我們稱之為山寨版數控切肉機。在切屑機上，除了這種切片機的外觀接近其他細節的外觀經得起考驗外，所以提醒廣大消費者，購買大型切肉機的機器，一定要看對方的資質，見相關證書，CHECH-CHA。RT很便宜，買Shanzhai版，那些不合理的設計會讓你發瘋。
A good CNC large meat cutter in every detail of the design is also very perfect and user-friendly. It can carry out daily operation without damaging the machine, with high efficiency and good stability. In recent years, there are some large CNC meat cutters in the market. We call it Shanzhai version CNC meat cutter. In addition to the fact that the appearance of this slicer is close to that of other details, it can stand the test. Therefore, consumers should be reminded that when buying large-scale meat cutter, they must see the qualification of the other party. See the relevant certificate, chech-cha. RT is very cheap, buy Shanzhai version, those unreasonable design will make you crazy.
不合理設計主要包括：
Unreasonable design mainly includes:
1.大型切肉機的檢查孔蓋太薄。數控大型切肉機優勢擰緊螺栓后，容易產生變形，使接頭表面不均勻，從接觸間隙泄漏油。
1. The manhole cover of large meat cutter is too thin. After tightening the bolts, it is easy to produce deformation, resulting in uneven joint surface and oil leakage from the contact gap.
2.閥體上沒有回油槽。潤滑油積聚在軸封、端蓋和接合面上。在差壓作用下，它從間隙中泄漏出來。
2. There is no oil return groove on the valve body. The lubricating oil accumulates on the shaft seal, end cover and joint surface. Under the action of differential pressure, it leaks out from the gap.
3.太多的加油：在數控大型切肉機的操作過程中，油池?cái)噭?dòng)得非常嚴重。機油在機器里到處飛濺。如果油量過大，則大量的潤滑油積聚在軸封、接頭表面等，造成泄漏。
3. Too much refueling: during the operation of large-scale CNC meat cutter, the oil pool stirred very seriously. The oil splashed all over the machine. If the oil quantity is too large, a large amount of lubricating oil will accumulate on the surface of shaft seal and joint, causing leakage.
軸封結構設計不合理。早期的數控大型切肉機大多采用油槽和氈環式軸封結構。裝配時，氈被壓縮變形，接頭表面間隙被密封。
The design of shaft seal structure is unreasonable. Most of the early CNC large-scale meat cutters used oil groove and felt ring type shaft seal structure. During assembly, the felt is compressed and deformed, and the surface gap of the joint is sealed.
維修過程不當：設備檢修時，表面污垢的清洗不當、密封劑的選擇不當、密封的反面和密封件的及時更換等都會造成漏油。
Improper maintenance process: during equipment maintenance, improper cleaning of surface dirt, improper selection of sealant, timely replacement of the reverse side of seal and sealing parts will cause oil leakage.
此外，還有一個非常重要的觀點，即在加工過程中，如果CNC大型切肉機未退火或老化，數控大型切肉機優勢則內應力不被，變形不可避免，產生間隙，并導致泄漏。因此，建議你從正規廠家購買設備。
In addition, there is a very important point of view, that is, in the process of processing, if the CNC large-scale meat cutter is not annealed or aging, the CNC large-scale meat cutter has the advantage that the internal stress will not be eliminated, and the deformation is inevitable, resulting in gaps and leakage. Therefore, it is recommended that you purchase equipment from regular manufacturers.
