作為操作
凈菜加工設備的人員，應該對使用的相關事項牢牢把握才行，這不僅關系到是否能夠讓設備完整順利的運行，主要是相關人員的。下面來講講吧。
As the personnel operating the clean vegetable processing equipment, they should firmly grasp the matters related to the use safety, which is not only related to whether the equipment can operate completely and smoothly, but also the safety of relevant personnel. Let's talk about it.
凈菜加工設備的機械傳動部分都是危險的，尤其是機器的外露部分和突出部分，如果沒有防護裝置，很容易造成工人受傷。特別是在清洗機械、裝配機械、檢修機械、加注油的過程中，或機械突然啟動、突然停止時，工人因缺乏防護裝置而受傷，或卷入機器的傳動部分。
The mechanical transmission part of the clean vegetable processing equipment is dangerous, especially the exposed part and protruding part of the machine. If there is no protective device, it is easy to cause workers to be injured. Especially in the process of cleaning machinery, assembling machinery, overhauling machinery and filling oil, or when the machinery suddenly starts or stops, workers are injured due to lack of protective devices or get involved in the transmission part of the machine.
因此，機器的傳動部分必須有可靠的保護裝置。任何操作者可能接觸或涉及的活動部件，如齒輪傳動、齒輪齒條傳動、皮帶傳動和鏈輪傳動等，都必須設置防護柵欄或防護罩。
Therefore, the transmission part of the machine must have reliable protective devices. Any moving parts that may be contacted or involved by the operator, such as gear drive, rack and pinion drive, belt drive and sprocket drive, must be equipped with protective fence or protective cover.
圍欄和防護罩的位置、圍欄的間距、金屬網的寬度和開口的大小，必須根據操作者手和身體的活動范圍來確定。
The position of the fence and protective cover, the spacing of the fence, the width of the metal mesh and the size of the opening must be determined according to the movement range of the operator's hand and body.
按要求著裝。敞開的衣服必須系好扣子，袖口系緊，長發塞進帽子里，在有活動部件的機器上工作時不能戴手套。機器運轉時，嚴禁用手調整或測量工件，停止測量并將刀架移位置。
Dress as required. Open clothes must be buttoned, cuffs fastened, long hair stuffed into the hat, and gloves must not be worn when working on machines with moving parts. When the machine is running, it is forbidden to adjust or measure the workpiece by hand. Stop the measurement and move the tool holder to a safe position.
工件和刀具應夾緊牢固，嚴禁用手觸摸機器轉動部件。確保操作所需的空間，并嚴格執行機器啟動時的規定信號。清理靠近危險部位的滾輪、刀具等雜物時，要用夾子（如鉤子、鐵刷等），不要用手拉扯。
The workpiece and cutting tool shall be clamped firmly, and it is strictly prohibited to touch the rotating parts of the machine with hands. Ensure the safe space required for operation and strictly implement the specified signals when starting the machine. When cleaning rollers, knives and other sundries close to dangerous parts, use clips (such as hooks, iron brushes, etc.) instead of pulling by hand.
禁止將工具、量具、夾具和工件放在機器或齒輪箱上，以防墜落傷人。停機進行清掃、加油、檢修、保養等作業時，必須鎖好機器啟動裝置，并懸掛警示牌；當您感到危險時，請立即操作緊急停止按鈕。
It is forbidden to put tools, measuring tools, fixtures and workpieces on the machine or gearbox to prevent falling and hurting people. When the machine is shut down for cleaning, refueling, overhaul and maintenance, the starting device of the machine must be locked and the warning sign must be hung; When you feel dangerous, please operate the emergency stop button immediately.
加工設備的操作位置應設置防滑、防墜的平臺和欄桿。加工設備作業位置大于2m時，應配置可靠的作業平臺、梯子和欄桿。加工設備的操作位置必須有良好的采光和通風。隔音機械設備應配備隔音設施，或?yàn)閱T工提供耳塞等防護用品。
The operating position of the processing equipment shall be provided with anti-skid and anti falling safety platforms and railings. When the operation position of processing equipment is greater than 2m, safe and reliable operation platforms, ladders and railings shall be equipped. The operating position of processing equipment must have good daylighting and ventilation. Sound insulation machinery and equipment shall be equipped with sound insulation facilities, or provide employees with ear plugs and other protective articles.
常用的動機械設備的結構有很大差異，具體的防護措施也不同。但一般來說，可遵循上面所講解的一些防護措施。更多內容的了解您還可以來網站
www.924349.cn進行咨詢。
The structures of commonly used mechanical equipment are very different, and the specific safety protection measures are also different. However, generally speaking, some protective measures explained above can be followed. For more information, you can also visit www.924349.cn Com.
